How to load film into your camera:
You will need:
1.Film
2. Camera
Step by Step:
1. Open the back of your camera by pulling the rewind crank up.
2.Place the film cassette in the space provided, the rewind crank must be lifted to enable the film to be put into place.
3. Push the rewind crank down to ensure that the film won't come out, pull a short length of the film.
4.Attach the film into a slit in the take-up spool, then fire the shutter advancing the film, this enables the film to be perfectly in place. Make sure the film is taught.
5. Shut the back and shoot 2 blank shots to ensure that the film that has been exposed to light won't be aligned where the shutter hole is.
6. All you need to do is set your shutter speed. You are ready to take photos. (Make sure you check the f stop each time)
~CRR
1.Film
2. Camera
Step by Step:
1. Open the back of your camera by pulling the rewind crank up.
2.Place the film cassette in the space provided, the rewind crank must be lifted to enable the film to be put into place.
3. Push the rewind crank down to ensure that the film won't come out, pull a short length of the film.
4.Attach the film into a slit in the take-up spool, then fire the shutter advancing the film, this enables the film to be perfectly in place. Make sure the film is taught.
5. Shut the back and shoot 2 blank shots to ensure that the film that has been exposed to light won't be aligned where the shutter hole is.
6. All you need to do is set your shutter speed. You are ready to take photos. (Make sure you check the f stop each time)
~CRR
No comments:
Post a Comment